ACS Re Assessment Courses

ACS qualifications must be re-taken every five years. Depending on what qualifications you hold, you may be better taking a discounted “bundle”. These “bundles” combine the CCN1 and between four and six of the appliance re assessments into one more cost effective solution.

The refresher training is an optional course run over one extra day. This brings engineers up to date on everything that has changed within the last five years on the core safety side. This extra course can be run the day before any reassessments or at different times if engineers don’t want to have too much time away from work.

For reassessment purposes, presentation of the previous certificates from 5 years ago will be needed – Gas Safe Register card is not sufficient.

You may also need to consider taking the CPA1 Combustion Performance Analysis course. This is now mandatory if you carry out CO/CO2 ratios on any appliances you work on. This can be done alongside any other gas courses you may be taking at the time.

Units Available;

· CCN1 – Core Domestic Gas Safety

· CEN1 – Domestic Central Heating Boilers

· CKR1 – Domestic Cooking Appliances

· DAH1 – Domestic Air Heaters

· HTR1 – Domestic Heaters – Gas Fires

· MET2 – Domestic Gas Meters (Was MET1)

· WAT1 – Domestic Water Heaters

Please note, CEN1 and WAT1 have now merged to become CENWAT – this is what will show on new certificates. If only CEN1 is held, CENWAT must be taken but with the WAT1 part as an initial unit.

Cost & Duration;

	Duration	Cost		Vat Amount		Sub Total		Certification Costs
Indiv. Appliance (CKR1/DAH1/HTR1 or MET2)	½ Day	£	75.00	£	15.00	£	£90.00	+ £50 - for any combination of core & appliances taken at the same time
CENWAT (Previously CEN1 & WAT1)	1 Day	£	150.00	£	30.00	£	180.00
CCN1 Only	1 Day	£	300.00	£	60.00	£	£360.00
CCN1+4 (Any 4 Appl. CENWAT counts as 2)	2 Days	£	499.00	£	99.80	£	£598.80
CCN1+5 (Any 5 Appl. CENWAT counts as 2)	2 Days	£	549.00	£	109.80	£	£658.80
CCN1+6 (Any 6 Appl. CENWAT counts as 2)	2 Days	£	599.00	£	119.80	£	£718.80
CCN1 Refresher Training	1 Day	£	185.00	£	37.00	£	£222.00	-
Appliances Refresher Training	1 Day	£	185.00	£	37.00	£	£222.00	-

Combustion Performance Analysis (CPA1)

**NEW UNIT** - now required by Gas Safe

Before this course can be taken, candidates must hold;

CCN1 Core Gas Safety and the CEN1 Central Heating Unit (or new CENWAT).

Do you:

Measure CO/CO2 ratios as part of your servicing routine?
Change gas vales and other components?
Use a flue gas analyser?

This course is for plumbing & heating installers who need to measure CO/CO2 ratios in the course of their day to day work.

It is now required by Gas Safe as proof that engineers are competent to carry out CO/CO2 analysis on any appliances they are working on.

Course Content;

Damage and factors that may affect combustion
Safe and accurate use of analyser to take CO/CO2 ratios - inc probe selection
Adjustments needed to remedy combustion problems

Cost & Duration;

Duration

Cost

Course Books

Vat

Sub Total

Cert Costs

Total

CPA1 Training &

Assessment

½ Day

£120

£24

£144

£50

£194

CPA1 Taken with Another NG Course

£95

£19

£114

Inc with other Gas Course

£114

Prices correct at time of printing but are subject to change.
We advise calling to confirm current prices.
Revision May 2007